Glass soap dispenser wall mounting without drilling black

Welcome to the product family! Our third product was a small labor of love to avoid spoiling beautiful bathrooms with a simple plastic soap dispenser and to add a stylish finishing touch.

The bathroom is thoughtfully designed down to the smallest detail and is meant to feel cozy and modern. A simple plastic bottle just doesn’t fit in. This was our main focus when developing our wall-mounted soap dispenser, and with the help of timeless shapes, high-quality materials, and surface treatments, we aimed to create a real eye-catcher next to the sink. We believe we succeeded.

Are you also annoyed that your soap dispenser constantly slides around on the sink? We tackled this problem with our soap dispenser and found a solution with the included wall mount! No sliding, no dripping, no stains, and you gain space on the sink. Isn’t that practical?

As with all our products, we had the highest quality standards for our soap dispenser. Mainly stainless steel and glass are used to give the dispenser a premium appearance. The pump dispenser is also mostly made of stainless steel.

In light of climate change and growing resource scarcity, we should all engage with the topic of sustainability. Our soap dispensers are made from sustainable, durable materials and their refillability helps reduce plastic waste.

We also stayed true to our principle of keeping everything as simple as possible when it comes to installation. Our wall mount can be easily attached using the included 3M adhesive pad. Then simply screw in the soap dispenser. Done.

Can the adhesive be removed again?
Of course, the 3M tape can be removed from hard surfaces without leaving any residue.
For this, we ask you to heat the adhesive with a hairdryer. Then carefully start to pry the product off and gradually remove the adhesive strip from the surface using a thin tool. The more delicate the surface, the more carefully you should carry out this process.

If any residue remains after removal, it can be cleaned with a solvent such as isopropanol. New mounting materials are required for reinstallation.

How do I install the self-adhesive soap dispenser on the wall?
The black soap dispenser comes with 3 M adhesive strips that allow for tool-free installation. Clean the surface thoroughly, remove the protective film, and press the soap dispenser firmly into the desired location.

Can I use the soap dispenser in the shower without drilling?
Yes, our soap dispenser can be used in the shower. The 3 M adhesive strips provide strong adhesion even in humid environments. The materials of the soap dispenser are corrosion-resistant and suitable for use in wet areas.

Does the soap dispenser match my bathroom decor?
We offer a wide range of colour combinations to suit any room. You can choose from a variety of designs and colours to perfectly match the soap dispenser to your bathroom decor.

Does the soap dispenser work with all liquids?
Our soap dispenser is compatible with all common liquid soaps, creams and gels. However, we recommend not using soaps that are too thick or coarse to avoid blockages.

Is mounting with adhesive pad really safe?
Yes, installation with the 3 M adhesive strips is very safe. These adhesive pads are specially designed to provide strong adhesion to various surfaces, including tiles, metal and glass. If the installation instructions are followed, the soap dispenser will last for years without any problems.

Height 16,5 cm Width 6,5 cm Depth 9,5 cm

Lieferumfang:
Single pack: 1 x Wall Mount Black 1 x bottle 250 ml 1 x Pump transmitter black 1 x adhesive pad Waterproof labels as shown (all labels shown for the respective variant are included) Double pack: 2 x Wall Bracket Black 2 x bottle 250 ml 2 x Pump transmitter black 2 x adhesive pad Waterproof labels as shown (all labels shown for the respective variant are included)

All of our products can be easily cleaned with water and detergent due to their high-quality surface treatment. Even commercially available, gentle cleaning agents do not pose a problem. However, please avoid aggressive, acidic cleaners.

Infos zu Versand & Rückgabe

Herstellerinformationen:
DFHH Designfabrik Hamburg GmbH
Mundsburger Damm 27B
22087 Hamburg
Deutschland
service@designfabrikhamburg.de