Glass soap dispenser wall mounting without drilling silver

Welcome to the product family! Our third product is a true passion project: to avoid spoiling beautiful bathrooms with simple plastic soap dispensers and to add a stylish highlight .

A bathroom should be thought through down to the smallest detail and appear both homely and modern. A simple plastic bottle simply doesn't fit the bill. For this reason, when developing our stainless steel soap dispenser, we placed particular emphasis on timeless shapes, high-quality materials, and surface treatments to create a real eye-catcher next to the sink. We're confident we've succeeded.

Does it bother you that your soap dispenser keeps sliding back and forth on the sink? With our soap dispenser and the matching wall mount, we've solved this problem! No slipping, no spills, no stains, and you gain space on the sink . Isn't that practical?

As with all our products, we set the highest quality standards for our soap dispenser. We primarily use stainless steel and glass to give the soap dispenser a high-quality appearance. The pump dispenser is also largely made of stainless steel.

In the wake of climate change and growing scarcity of raw materials, we should all address the issue of sustainability. Our soap dispensers are made from sustainable, durable materials and, thanks to their refillability, reduce plastic waste.

We've also stayed true to our principle of keeping everything as simple as possible when it comes to installation. Our wall mount bracket is easily attached using the included 3M adhesive pad. Then simply screw in the soap dispenser. Done.

Can the adhesive be removed?
Of course, the 3M adhesive tape can be removed from hard surfaces without leaving any residue.
To do this, we ask you to heat the adhesive with a hairdryer. Then, carefully pry off the product and, using a thin object, gradually remove the adhesive strip from the surface. The more sensitive the surface, the more careful you should be with this process.

If any residue remains after disassembly, it must be removed with a solvent such as isopropanol. New mounting hardware is required for reassembly.

How do I mount the self-adhesive soap dispenser on the wall?
The stainless steel soap dispenser is delivered with 3 M adhesive strips, which allows tool-free installation. Clean the surface thoroughly, remove the protective film, and press the soap dispenser firmly into the desired location.

Can I use the stainless steel soap dispenser in the shower?
Yes, our soap dispenser can be used in the shower without any problem. The 3 M adhesive pads provide strong adhesion even in humid environments. The materials of the soap dispenser are corrosion-resistant and suitable for use in wet areas.

Does the no-drill soap dispenser fit into my bathroom decor?
We offer a wide range of colour combinations to suit any room. You can choose from a variety of colours and designs to perfectly match the soap dispenser to your bathroom decor.

Does the soap dispenser work with any liquid?
Our soap dispenser is compatible with all common creams, liquid soaps and gels. However, we recommend not using soaps that are too thick or coarse to avoid blockages.

Is the adhesive mounting really safe?
Yes, installation with the 3 M adhesive pad is very safe. These adhesive strips are specially designed to provide strong adhesion to various surfaces, including tiles, metal and glass. If the installation instructions are followed, the soap dispenser will last for years without any problems.

Height 16,5 cm Width 6,5 cm Depth 9,5 cm

Scope of delivery:
1 x wall bracket brushed stainless steel 1 x bottle 250 ml 1 x pump transmitter brushed stainless steel 1 x adhesive pad Waterproof labels as shown (all labels shown for the respective variant are included)

All of our products can be easily cleaned with water and detergent due to their high-quality surface treatment. Even commercially available, gentle cleaning agents do not pose a problem. However, please avoid aggressive, acidic cleaners.

Information on shipping & returns

Manufacturer information:
DFHH Designfabrik Hamburg GmbH
Mundsburger Damm 27B
22087 Hamburg
Germany
service@designfabrikhamburg.de